Dock Electrical Services in Largo, FL
Boat lift wiring, dock outlets, lighting, and shore power, done right for the waterfront homes of Largo by a licensed master electrician.
Waterfront & Dock Electrical Experts in Largo
Largo is home turf for us. Our shop sits right here on Belcher Road, so we know the bayside streets near the Narrows and the commercial corridors along East Bay Drive and Ulmerton Road as well as anyone. Largo backs onto some of the most active boating water in Pinellas, where private docks and covered boat lifts line the canals leading out toward the Intracoastal.
Dock and boat-lift work is a specialty of its own. The circuits sit a few feet above salt water at the Intracoastal Waterway, Clearwater Harbor, and the tidal canals around the Narrows and Belleair, taking sun, humidity, and every storm that comes through. Ordinary wiring corrodes and quits fast out there. We have wired docks, lifts, and waterfront homes around Tampa Bay since 1997, and owner Christian Orbesen, a Florida State Certified Master Electrician, uses wet-rated and marine-rated parts on every job so the work lasts.
Need a new boat-lift circuit, GFCI dock outlets, lighting run out to the end of the pier, a shore-power pedestal, or a fix for a system that keeps tripping? We handle the whole job in Largo, including the permit through the City of Largo Building Division and the inspection. If you are after general home wiring instead, see our Largo electrician page.
Dock & Boat Lift Electrical Services in Largo
Full waterfront electrical work, built to survive the Largo marine environment.
Boat Lift Wiring & Motors
We run dedicated, correctly sized circuits for single and dual boat lifts, and we replace worn lift motors and control wiring. Everything is built to handle the load and the conditions along the Intracoastal Waterway, Clearwater Harbor, and the tidal canals around the Narrows and Belleair.
Dock Outlets & GFCI Protection
Weatherproof, GFCI-protected outlets sized for pressure washers, pumps, and tools. We wire them to the current NEC rules for docks and boatyards so they pass inspection and keep your family safe.
Dock & Piling Lighting
Dock lighting, piling caps, and pathway fixtures that make the dock safe to walk at night and look good doing it. We choose fixtures that hold up to constant salt spray.
Shore Power Pedestals
Marine shore-power pedestals and 30 or 50 amp hookups so your batteries stay charged and your systems keep running while the boat is tied up.
Dock Sub-Panels & Feeders
We run a new feeder from the house out to a weatherproof sub-panel on the dock. That gives you clean power for lifts, lighting, and outlets, with room to add more down the road.
Dock Repairs & Troubleshooting
Breakers that keep tripping, corroded connections, a lift motor that quit, a dead GFCI. We find the real fault and rebuild it the right way with corrosion-resistant parts.
Dock Electrical Work on the Water
Recent Dock & Boat Lift Projects
What Largo Boat Owners Say
"We wanted new GFCI outlets and lighting run out to the end of the dock. Brightwire pulled the permit, did clean conduit work down the pilings, and passed inspection the first time. The dock looks great lit up at night."
Get a Free Dock Electrical Estimate in Largo
Tell us about your Largo dock, boat lift, or shore-power project and we will get back to you within one business day.
Request Your Free Quote
No obligation. Fast response.
Largo Dock Electrical FAQs
How much does it cost to wire a boat lift in Largo?
Most single boat-lift circuits in Largo run somewhere between $650 and $1,500 installed. The price comes down to how far the dock is from your panel, whether you need a new dock sub-panel, and the shape the existing wiring is in. Dual lifts, shore-power pedestals, and full lighting packages cost more. We come out, look at the job, and give you a firm price for free before any work starts.
Do I need a permit for dock electrical work in Largo?
Yes. Electrical work on docks and boat lifts in Largo needs a permit from the City of Largo Building Division, and waterfront jobs can also involve Florida DEP and local water rules. We pull the electrical permit, coordinate with your dock builder, and handle the inspection so you are not left chasing any of it.
Will dock wiring hold up to the salt air around Largo?
It does when it is installed correctly. Circuits this close to the water at the Intracoastal Waterway, Clearwater Harbor, and the tidal canals around the Narrows and Belleair take a beating from salt, so we use wet-rated and marine-rated parts: corrosion-resistant covers, stainless hardware, the right conduit, and GFCI protection on every circuit. That is the difference between a dock that keeps working and one that quits after a couple of seasons.
Can you fix a boat lift that keeps tripping the breaker?
Usually, yes. A lift that keeps tripping is normally a corroded connection, a failing motor, a circuit that is too small, or a worn-out GFCI. Those are everyday repairs for us on Largo docks. We find what is actually causing it instead of just resetting the breaker, then bring the circuit back up to code.
Why Largo Chooses Brightwire for Dock Work
Real Waterfront Experience
We have wired docks, lifts, and seawalls across Tampa Bay for years. This is something we do all the time, not a side job.
Master Electrician
Owner Christian Orbesen holds a Florida State Certified Master Electrician license, the highest there is in the state.
Built to Survive Salt Air
Wet-rated and marine-rated parts, GFCI protection, and corrosion-resistant hardware on every dock circuit.
Permits Handled
We pull the permit through the City of Largo Building Division and set up the inspection, so the job is legal, safe, and signed off.
Need a Dock Electrician in Largo?
Call Brightwire Electric for a free estimate on boat lift wiring, dock power, or lighting in Largo.